Creating One Wifi Network with Multiple Access Point

Hi, this is your friend Nurul Islam, the founder of the site “Technab.” I am a computer hardware engineer. After graduation, I joined a renowned...Read more

So you’re going through a weak Wi-Fi signal issue and want to get rid of this? In that case, nothing will be better than creating multiple access points that will enhance the Wi-Fi coverage with a great speed.

However, the fact is creating one Wi-Fi network with multiple access points is not everyone’s cup of tea. Although the process is not that difficult, most consumers find it difficult due to the lack of proper guidance.

Well, you have to perform a wireless site survey, use a controller, select the proper location, adjust the signal strength, and choose the right channel.

See, the process is really simple. Follow this article to learn the steps and the whole AP creating instructions in detail.

Creating One Wi-Fi Network With Multiple Access Points

To be honest, creating one Wi-Fi network with multiple access points isn’t as tough as most people think. With proper guidance, anyone can easily be able to create access points.

Creating One Wifi Network with Multiple Access Points

And in order to create multiple access points, you have to go through a step by step procedure. Following proper instructions will lead you to create reliable Wi-Fi network access points. Below, you will find more information about them:

Perform A Wireless Site Survey

You cannot mount your access points anywhere based on your assumptions and expect a good and strong connection. You have to go through a wireless site survey to identify the weak points and enhance the optimal performance.

Perform A Wireless Site Survey

However, to perform a wireless site survey, you can take help from free services like netspotapp. Once you’ll be able to find the weakest points, then you can proceed to the next step.

Install A Controller

Only identifying the weak points is not enough as you also have to install a controller as well. By installing a controller, you can easily be able to manage all your access points in a single interface.

Well, you may also wish to use a single SSID and password for all your access points. In that case, a controller will help you so that you will not have to join different networks every time you move to different coverage areas.

Select Appropriate Locations

A wireless site survey may have already helped you identify places where the Wi-Fi signal is relatively weak. So, now all you have to do is choose an ideal location to install the access points. Also, try to follow the traditional method of mounting the access points in the center position of the room which requires a strong Wi-Fi signal.

Select Appropriate Locations

Make Sure The Ethernet Cable Is Not Too Long

Once you’ve selected the appropriate locations and mounted the access points, it’s time to connect them through an Ethernet cable. However, you must use a quality Ethernet cable like cat5 or cat6 Ethernet cable.

Make Sure The Ethernet Cable Is Not Too Long

Another thing you have to do is you shouldn’t run the cable more than 328 feet for connecting access points. Keeping the Ethernet cable longer than 328 feet can negatively affect wireless Internet performance.

Adjust The Signal Strength Of Each Access Point To Ensure Maximum Coverage

Another thing you need to do to ensure excellent connectivity in all coverage areas is to adjust the signal strength of the APs. And if you’ve installed a controller, then you can be able to adjust the signal strength pretty easily.

Adjust The Signal Strength Of Each Access Point To Ensure Maximum Coverage

Choose The Correct Channels

Choosing the right channels for your access points can also contribute to optimal wireless coverage. However, do you know what channels would be the best choice for you?

Choose The Correct Channels

Well, you have to choose a non-overlapping channel to prevent your access points from interfering with each other. So, if your access points are broadcasting on the 2.5 GHz bands, try to choose a channel from 1, 6, and 11.

Moreover, the 5GHz spectrum offers many non-overlapping channels. And the non-overlapping channels are divided into four separate sections, including UNII-1, UNII-2, UNII-2 extended, UNII-3, and ISM.

Most importantly, choosing the right channel for your access points can give you enhanced Wi-Fi network coverage.

Choose The Ideal Power Settings

Another easy solution you will get by using a controller is automatically selecting the optimal power level for your access points. The controller will select the perfect power level.

On the other hand, you have to manually set up the power settings if you set the access points in a high-density area. In that case, the site survey will help you in selecting the ideal power setting for your APs.

What Benefits You’ll Get By Creating Multiple Access Points?

You already know why you’re creating multiple access points. However, if you want to get a clear idea about all benefits that you’ll get after creating multiple access points, follow the section below:

What Benefits You’ll Get By Creating Multiple Access Points

  • One of the main benefits you get after creating multiple access points on your WiFi network is strengthening the WiFi network. Multiple access points will eliminate the weak zone issues, which will ensure equal signals for everyone.
  • Multiple access points will extend the wifi range and let you enjoy wifi coverage over a large area.
  • After creating multiple access points, you won’t have to go through bandwidth issues. That is because you can easily be able to switch to another access point to get rid of bandwidth issues.
  • Since you can easily switch between access points, you won’t have to worry about the obstructions that cause weak signals.

These are some of the core benefits that you’ll get by creating multiple access points to your Wi-Fi connection system.

Closing Thoughts

Since now you know the process of creating one Wi-Fi network with multiple access points, you can easily get rid of Wi-Fi signal issues. Weak signal is one of the common issues that most Wi-Fi users face.

However, now you know how to strengthen your Wi-Fi network, so today try creating multiple access points. Throughout this article, we’ve tried to show the easiest method with detailed instructions.

Here we’ve also included the core benefits that you’ll get after creating multiple access points. And remember conducting a wireless site survey and choosing the right access points are the most crucial aspects.

Hi, this is your friend Nurul Islam, the founder of the site “Technab.” I am a computer hardware engineer. After graduation, I joined a renowned networking tools manufacturing company as an IT specialist and hardware technician.

More Posts

Subscribe to TechNab

Subscribe to our daily newsletter to get the latest industry news.

    By clicking the "Subscribe" button, I agree and accept the privacy policy of TechNab.

    Leave a Comment

    Follow by Email
    LinkedIn
    Share